Software · Data Bridge

Data Bridge: connect the data sources you already have

Data Bridge is the part of DBR77 IIoT that talks to hardware. It connects to MQTT brokers, turns broker topics into named readings with units and registers each device with its own certificate. The readings then go to monitoring, history and alarms.

  • Bridges to the MQTT brokers you already have
  • Topics mapped to readings with a name and unit
  • A certificate for every device
Pilot result

One corrugated packaging line

Data from one pilot in a European plant. Client name anonymised; results differ from plant to plant.

Read the pilot story
24 → 9 min
average response to a stop, before and after the pilot
61% → 70%
OEE, confirmed by the plant
1 line
pilot scope
WHAT IT DOES

From a broker topic to a reading with a name

Data Bridge signal mappings for Modbus, FANUC and OPC UA signals with a normalization previewData Bridge signal mappings for Modbus, FANUC and OPC UA signals with a normalization preview
Signal mappings in the demo factory: Modbus registers, FANUC alarm and run state, OPC UA part count and RS-485 temperature.

Bridges to your MQTT brokers

Add an existing broker with its host, port and topic prefix, with TLS if the broker uses it. Gateways, PLC adapters and meters that already publish MQTT stay as they are.

Topics become readings

A mapping says which topic belongs to which device and signal, with its name and unit. A preview shows how a sample message will be read before the mapping goes live.

Device profiles

A profile describes the topics a type of device publishes. Applying it to a bridge creates the mappings for every device of that type.

A certificate for every device

Each device is registered with a certificate from the plant's own certificate authority. The private key does not pass through the server, and a certificate can be reissued or revoked.

Last known state

The device shadow keeps the most recent state each device reported.

Firmware releases

Firmware files are uploaded and released to devices from the same place.

FILMS

See it in action

Short films on sample data from the demo. Narration and transcripts are in English.

How to watch your sensors | DBR77 IRIS IoT · Example data
Transcript

Sensors lists every sensor with its device, station and range. You see the live value, the unit, and when it last reported. Search by name, or filter by device and station. Add sensor sets up a new one with its thresholds. Export the list to Excel or CSV. Sensor types, in the next tab, define the units and ranges you can reuse.

Up close

What it looks like

List of MQTT bridges with host, topic prefix and connection timeList of MQTT bridges with host, topic prefix and connection time
MQTT bridges to the brokers of a utilities meter network, a FANUC cell and a line gateway.
Device provisioning form and device list with options to reissue or revoke certificatesDevice provisioning form and device list with options to reissue or revoke certificates
Provisioning devices with a certificate; each certificate can be reissued or revoked.
HOW IT STARTS

Connecting the first data source

  1. 1List the sourcesList which machines, PLC adapters, meters and brokers already publish data and which ones need a DBR77 gateway.
  2. 2Connect the broker or gatewayAdd the bridge, or provision the device with its certificate.
  3. 3Map and checkMap topics to signals and check a sample message in the preview before the data goes to dashboards and alarms.
Choosing the setup

When Data Bridge is the right start

It fits when

Your devices already publish data over MQTT

Gateways, PLC adapters and meters that already publish MQTT stay as they are. You add the broker, map each topic to a device and signal with a name and unit, and preview a sample message before the mapping goes live.

You may need more

The machine publishes nothing yet

Data Bridge needs a source that publishes data, such as a DBR77 gateway, an existing broker or an edge device. The DataHub gateway reads the machine and publishes its signals.

See the DataHub gateway
Limits

What Data Bridge does not do

It does not keep measurement history; that lives in machine monitoring. It is not a safety function: messages it sends to devices are an ordinary integration channel.

See machine monitoring

Will my machine connect?

Tell us the machine type and its controller. Our team checks what data the machine can provide and replies by email.

FAQ

Common questions about Data Bridge

Which data sources can Data Bridge connect?
MQTT brokers. You add an existing broker with its host, port and topic prefix, with TLS if the broker uses it. Gateways, PLC adapters and meters that already publish MQTT stay as they are.
How does a device get its certificate?
Each device is registered with a certificate from the plant's own certificate authority. The private key does not pass through the server, and a certificate can be reissued or revoked.
Can I check a mapping before it goes live?
Yes. A preview shows how a sample message will be read before the mapping goes live.
Does Data Bridge keep measurement history?
No. The history lives in machine monitoring. Data Bridge connects the sources and gives each reading its name and unit.
What if my machine does not publish any data?
Data Bridge needs a source that publishes data, such as a DBR77 gateway, an existing broker or an edge device. Use the form on this page to ask whether your machine can connect.
Getting started

Three ways to take the first step

No hardware

Online demo

The DBR77 IIoT panel on sample data: machine states, OEE, alarms and energy.

See the demo
On your shop floor

Pilot

1–3 workstations or one line, on your own data. It ends with a report and a recommendation for the next step.

Plan a pilot
5 minutes

Downtime cost calculator

Work out what unplanned downtime costs you per year and how much a smaller share of it is worth.

Calculate

Bring your existing signals in

See the bridges and mappings in the online demo, or connect your first source in a pilot.